===========================
step 1
lua ProjectDIR/src/lmod.in.lua shell --regression_testing --version
===========================
Modules based on Lua: Version 8.7.53 2024-10-12 19:57 -05:00
    by Robert McLay mclay@tacc.utexas.edu
===========================
step 2
lua ProjectDIR/src/lmod.in.lua shell --regression_testing --help
===========================
Usage: module [options] sub-command [args ...]
Options:
  -h -? -H --help                   This help message
  -s availStyle --style=availStyle  Site controlled avail style: system (default: system)
  --regression_testing              Lmod regression testing
  -b --brief                        brief listing with only user specified modules
  -D                                Program tracing written to stderr
  --debug=dbglvl                    Program tracing written to stderr (where dbglvl is a number 1,2,3)
  --pin_versions                    When doing a restore use specified version, do not follow defaults
  -d --default                      List default modules only when used with avail
  -q --quiet                        Do not print out warnings
  --expert                          Expert mode
  -t --terse                        Write out in machine readable format for commands: list, avail, spider, savelist
  --initial_load                    loading Lmod for first time in a user shell
  --latest                          Load latest (ignore default)
  -I --ignore_cache                 Treat the cache file(s) as out-of-date
  --novice                          Turn off expert and quiet flag
  --raw                             Print modulefile in raw output when used with show
  -w twidth --width=twidth          Use this as max term width
  -v --version                      Print version info and quit
  -r --regexp                       use regular expression match
  --gitversion                      Dump git version in a machine readable way and quit
  --dumpversion                     Dump version in a machine readable way and quit
  --dumpname                        Dump the name Lmod in a machine readable way and quit
  --check_syntax --checkSyntax      Checking module command syntax: do not load
  --config                          Report Lmod Configuration
  --miniConfig                      Report Lmod Configuration differences
  --config_json                     Report Lmod Configuration in json format
  --mt                              Report Module Table State
  --timer                           report run times
  -f --force                        force removal of a sticky module or save an empty collection
  --redirect                        Send the output of list, avail, spider to stdout (not stderr)
  --no_redirect                     Force output of list, avail and spider to stderr
  --show_hidden -A --all            Avail and spider will report hidden modules
  --spider_timeout=timeout          a timeout for spider
  -T --trace                        trace major changes such as loads
  --nx --no_extensions              Do not print extensions
  --loc --location                  Just print the file location when using show
  --terse_show_extensions           report extensions when doing a terse avail
  --pod                             Generate pod format
module [options] sub-command [args ...]
Help sub-commands:
  help                              prints this message
  help                module [...]  print help message from module(s)
Loading/Unloading sub-commands:
  load | add          module [...]  load module(s)
  try-load | try-add  module [...]  Add module(s), do not complain if not found
  del | unload        module [...]  Remove module(s), do not complain if not found
  swap | sw | switch  m1 m2         unload m1 and load m2
  purge                             unload all modules
  refresh                           reload aliases from current list of modules.
  update                            reload all currently loaded modules.
Listing / Searching sub-commands:
  list                              List loaded modules
  list                s1 s2 ...     List loaded modules that match the pattern
  avail | av                        List available modules
  avail | av          string        List available modules that contain "string".
  category | cat                    List all categories
  category | cat      s1 s2 ...     List all categories that match the pattern and display their modules
  overview | ov                     List all available modules by short names with number of versions
  overview | ov       string        List available modules by short names with number of versions that contain "string"
  spider                            List all possible modules
  spider              module        List all possible version of that module file
  spider              string        List all module that contain the "string".
  spider              name/version  Detailed information about that version of the module.
  whatis              module        Print whatis information about module
  keyword | key       string        Search all name and whatis that contain "string".
Searching with Lmod:
  All searching (spider, list, avail, keyword) support regular expressions:
  -r spider           '^p'          Finds all the modules that start with `p' or `P'
  -r spider           mpi           Finds all modules that have "mpi" in their name.
  -r spider           'mpi$         Finds all modules that end with "mpi" in their name.
Handling a collection of modules:
  save | s                          Save the current list of modules to a user defined "default" collection.
  save | s            name          Save the current list of modules to "name" collection.
  reset                             The same as "restore system"
  restore | r                       Restore modules from the user's "default" or system default.
  restore | r         name          Restore modules from "name" collection.
  restore             system        Restore module state to system defaults.
  savelist                          List of saved collections.
  describe | mcc      name          Describe the contents of a module collection.
  disable             name          Disable (i.e. remove) a collection.
Deprecated commands:
  getdefault          [name]        load name collection of modules or user's "default" if no name given.
                                    ===> Use "restore" instead  <====
  setdefault          [name]        Save current list of modules to name if given, otherwise save as the default list for you the user.
                                    ===> Use "save" instead. <====
Miscellaneous sub-commands:
  is-loaded           modulefile    return a true status if module is loaded
  is-avail            modulefile    return a true status if module can be loaded
  show                modulefile    show the commands in the module file.
  use [-a]            path          Prepend or Append path to MODULEPATH.
  unuse               path          remove path from MODULEPATH.
  tablelist                         output list of active modules as a lua table.
Important Environment Variables:
  LMOD_COLORIZE                     If defined to be "YES" then Lmod prints properties and warning in color.
Lmod Web Sites
  Documentation:    https://lmod.readthedocs.org
  GitHub:           https://github.com/TACC/Lmod
  SourceForge:      https://lmod.sf.net
  TACC Homepage:    https://www.tacc.utexas.edu/research-development/tacc-projects/lmod
  To report a bug please read https://lmod.readthedocs.io/en/latest/075_bug_reporting.html
Modules based on Lua: Version 8.7.53 2024-10-12 19:57 -05:00
    by Robert McLay mclay@tacc.utexas.edu
===========================
step 3
lua ProjectDIR/src/lmod.in.lua shell --regression_testing help
===========================
Usage: module [options] sub-command [args ...]
Options:
  -h -? -H --help                   This help message
  -s availStyle --style=availStyle  Site controlled avail style: system (default: system)
  --regression_testing              Lmod regression testing
  -b --brief                        brief listing with only user specified modules
  -D                                Program tracing written to stderr
  --debug=dbglvl                    Program tracing written to stderr (where dbglvl is a number 1,2,3)
  --pin_versions                    When doing a restore use specified version, do not follow defaults
  -d --default                      List default modules only when used with avail
  -q --quiet                        Do not print out warnings
  --expert                          Expert mode
  -t --terse                        Write out in machine readable format for commands: list, avail, spider, savelist
  --initial_load                    loading Lmod for first time in a user shell
  --latest                          Load latest (ignore default)
  -I --ignore_cache                 Treat the cache file(s) as out-of-date
  --novice                          Turn off expert and quiet flag
  --raw                             Print modulefile in raw output when used with show
  -w twidth --width=twidth          Use this as max term width
  -v --version                      Print version info and quit
  -r --regexp                       use regular expression match
  --gitversion                      Dump git version in a machine readable way and quit
  --dumpversion                     Dump version in a machine readable way and quit
  --dumpname                        Dump the name Lmod in a machine readable way and quit
  --check_syntax --checkSyntax      Checking module command syntax: do not load
  --config                          Report Lmod Configuration
  --miniConfig                      Report Lmod Configuration differences
  --config_json                     Report Lmod Configuration in json format
  --mt                              Report Module Table State
  --timer                           report run times
  -f --force                        force removal of a sticky module or save an empty collection
  --redirect                        Send the output of list, avail, spider to stdout (not stderr)
  --no_redirect                     Force output of list, avail and spider to stderr
  --show_hidden -A --all            Avail and spider will report hidden modules
  --spider_timeout=timeout          a timeout for spider
  -T --trace                        trace major changes such as loads
  --nx --no_extensions              Do not print extensions
  --loc --location                  Just print the file location when using show
  --terse_show_extensions           report extensions when doing a terse avail
  --pod                             Generate pod format
module [options] sub-command [args ...]
Help sub-commands:
  help                              prints this message
  help                module [...]  print help message from module(s)
Loading/Unloading sub-commands:
  load | add          module [...]  load module(s)
  try-load | try-add  module [...]  Add module(s), do not complain if not found
  del | unload        module [...]  Remove module(s), do not complain if not found
  swap | sw | switch  m1 m2         unload m1 and load m2
  purge                             unload all modules
  refresh                           reload aliases from current list of modules.
  update                            reload all currently loaded modules.
Listing / Searching sub-commands:
  list                              List loaded modules
  list                s1 s2 ...     List loaded modules that match the pattern
  avail | av                        List available modules
  avail | av          string        List available modules that contain "string".
  category | cat                    List all categories
  category | cat      s1 s2 ...     List all categories that match the pattern and display their modules
  overview | ov                     List all available modules by short names with number of versions
  overview | ov       string        List available modules by short names with number of versions that contain "string"
  spider                            List all possible modules
  spider              module        List all possible version of that module file
  spider              string        List all module that contain the "string".
  spider              name/version  Detailed information about that version of the module.
  whatis              module        Print whatis information about module
  keyword | key       string        Search all name and whatis that contain "string".
Searching with Lmod:
  All searching (spider, list, avail, keyword) support regular expressions:
  -r spider           '^p'          Finds all the modules that start with `p' or `P'
  -r spider           mpi           Finds all modules that have "mpi" in their name.
  -r spider           'mpi$         Finds all modules that end with "mpi" in their name.
Handling a collection of modules:
  save | s                          Save the current list of modules to a user defined "default" collection.
  save | s            name          Save the current list of modules to "name" collection.
  reset                             The same as "restore system"
  restore | r                       Restore modules from the user's "default" or system default.
  restore | r         name          Restore modules from "name" collection.
  restore             system        Restore module state to system defaults.
  savelist                          List of saved collections.
  describe | mcc      name          Describe the contents of a module collection.
  disable             name          Disable (i.e. remove) a collection.
Deprecated commands:
  getdefault          [name]        load name collection of modules or user's "default" if no name given.
                                    ===> Use "restore" instead  <====
  setdefault          [name]        Save current list of modules to name if given, otherwise save as the default list for you the user.
                                    ===> Use "save" instead. <====
Miscellaneous sub-commands:
  is-loaded           modulefile    return a true status if module is loaded
  is-avail            modulefile    return a true status if module can be loaded
  show                modulefile    show the commands in the module file.
  use [-a]            path          Prepend or Append path to MODULEPATH.
  unuse               path          remove path from MODULEPATH.
  tablelist                         output list of active modules as a lua table.
Important Environment Variables:
  LMOD_COLORIZE                     If defined to be "YES" then Lmod prints properties and warning in color.
Lmod Web Sites
  Documentation:    https://lmod.readthedocs.org
  GitHub:           https://github.com/TACC/Lmod
  SourceForge:      https://lmod.sf.net
  TACC Homepage:    https://www.tacc.utexas.edu/research-development/tacc-projects/lmod
  To report a bug please read https://lmod.readthedocs.io/en/latest/075_bug_reporting.html
Modules based on Lua: Version 8.7.53 2024-10-12 19:57 -05:00
    by Robert McLay mclay@tacc.utexas.edu
===========================
step 4
lua ProjectDIR/src/lmod.in.lua shell --regression_testing help amber
===========================
Module Specific Help for "amber/9"
The TACC Amber installation only includes the parallel Sander/pmemd modules.
The Amber modulefile defines the following environment variables:
TACC_AMBER_DIR, TACC_AMBER_DOC, TACC_AMBER_BIN for the location of
the Amber distribution, documentation, and binaries, respectively.
Also, AMBERHOME is set to the Amber Home Directory (TACC_AMBER_DIR),
and $AMBERHOME/exe is included in the PATH variable.
Here is an example command for executing the Sander module:
sander.LES -i tes.in -o tes.out -p tes.prmtop.save -c tes.x -r tes.rst
Version 9
===========================
step 5
lua ProjectDIR/src/lmod.in.lua shell --regression_testing --config
===========================
Modules based on Lua: Version 8.7.53 2024-10-12 19:57 -05:00
    by Robert McLay mclay@tacc.utexas.edu
Description                                                   Value
Allow root to use Lmod (LMOD_ALLOW_ROOT_USE)                  yes
Allow TCL modulefiles (LMOD_ALLOW_TCL_FILES)                  yes
Auto swapping (LMOD_AUTO_SWAP)                                yes
Avail Style (LMOD_AVAIL_STYLE)                                <system>
Case Independent Sorting (LMOD_CASE_INDEPENDENT_SORTING)      no
Colorize Lmod (LMOD_COLORIZE)                                 yes
Configuration dir (LMOD_CONFIG_DIR)                           /etc/lmod
Disable Same Name AutoSwap (LMOD_DISABLE_SAME_NAME_AUTOSWAP)  no
Display Extension w/ avail (LMOD_AVAIL_EXTENSIONS)            yes
Use ~/.config dir only (LMOD_USE_DOT_CONFIG_ONLY)             no
Downstream Module Conflicts (LMOD_DOWNSTREAM_CONFLICTS)       no
Allow duplicate paths (LMOD_DUPLICATE_PATHS)                  no
Dynamic Spider Cache (LMOD_DYNAMIC_SPIDER_CACHE)              yes
Require Exact Match/no defaults (LMOD_EXACT_MATCH)            no
Export the module command (LMOD_EXPORT_MODULE)                yes
Allow extended default (LMOD_EXTENDED_DEFAULT)                yes
Use attached TCL over system call (LMOD_FAST_TCL_INTERP)      yes
Is fast TCL interp available (LMOD_USING_FAST_TCL_INTERP)     no
File ignore patterns (LMOD_FILE_IGNORE_PATTERNS)              {"%.version[-._].*", "%.modulerc[-._].*"}
Use italic instead of dim (LMOD_HIDDEN_ITALIC)                no
KSH Support (LMOD_KSH_SUPPORT)                                no
Language used for err/msg/warn (LMOD_LANG)                    en
Site message file (LMOD_SITE_MSG_FILE)                        <empty>
lmod_config.lua location (LMOD_CONFIG_LOCATION)               no
LUA_CPATH                                                     @sys_lua_cpath@
LUA_PATH                                                      @sys_lua_path@
System lua-term (LMOD_HAVE_LUA_TERM)                          no
Modules Auto Handling (MODULES_AUTO_HANDLING)                 no
avail: Include modulepath dir (LMOD_MPATH_AVAIL)              no
MODULEPATH_INIT (LMOD_MODULEPATH_INIT)                        @PKG@/init/.modulespath -> <empty>
MODULEPATH_ROOT (MODULEPATH_ROOT)
NAG File (LMOD_ADMIN_FILE)                                    ProjectDIR/src/../../etc/admin.list
number of cache dirs                                          0
OS Name                                                       <N/A>
Pager (LMOD_PAGER)                                            less
Pager Options (LMOD_PAGER_OPTS)                               -XqMREF
Path to HashSum (LMOD_HASHSUM_PATH)                           PATH_to_HASHSUM
Path to Lua                                                   lua
Pin Versions in restore (LMOD_PIN_VERSIONS)                   no
Pkg Class name                                                Pkg
Lmod prefix                                                   @PREFIX@
Site controlled prefix (SITE_CONTROLLED_PREFIX)               no
Prepend order (LMOD_PREPEND_BLOCK)                            normal
LMOD_RC (LMOD_RC)                                             <empty>
Redirect to stdout (LMOD_REDIRECT)                            no
Supporting Full Settarg Use (LMOD_SETTARG_FULL_SUPPORT)       no
Site Name (LMOD_SITE_NAME)                                    <empty>
Site Pkg location                                             standard
Ignore Cache (LMOD_IGNORE_CACHE)                              no
Cached loads (LMOD_CACHED_LOADS)                              no
System Default Modules (LMOD_SYSTEM_DEFAULT_MODULES)          <empty>
System Name (LMOD_SYSTEM_NAME)                                <empty>
SYSHOST (cluster name) (LMOD_SYSHOST)                         <empty>
TCL Version                                                   <N/A>
Terse Decorations (LMOD_TERSE_DECORATIONS)                    yes
User cache valid time(sec) (LMOD_ANCIENT_TIME)                86400
Write cache after (sec) (LMOD_SHORT_TIME)                     2
Threshold (sec) (LMOD_THRESHOLD)                              1
Tmod find first rule (LMOD_TMOD_PATH_RULE)                    no
Tmod prepend PATH Rule (LMOD_TMOD_PATH_RULE)                  no
Tracing (LMOD_TRACING)                                        no
uname -a
User Cache Directory                                          OutputDIR/.cache/lmod
MODULEPATH:   ProjectDIR/rt/help/mf
LMOD_PACKAGE_PATH            D          nil          <empty>
LMOD_SYSTEM_DEFAULT_MODULES  D          __unknown__  <empty>
LMOD_USING_FAST_TCL_INTERP   Other      yes          no
Active RC file(s):
ProjectDIR/init/lmodrc.lua
 OutputDIR/.lmodrc.lua
 Lmod Property Table (LMOD_RC):
propT = {
  arch = {
    displayT = {
      gpu = {
        color = "red",
        doc = "built for GPU",
        full_color = false,
        long = "(g)",
        short = "(g)",
      },
      ["gpu:mic"] = {
        color = "red",
        doc = "built natively for MIC and GPU",
        full_color = false,
        long = "(g,m)",
        short = "(gm)",
      },
      ["gpu:mic:offload"] = {
        color = "red",
        doc = "built natively for MIC and GPU and offload to the MIC",
        full_color = false,
        long = "(g,m,o)",
        short = "(@)",
      },
      mic = {
        color = "blue",
        doc = "built for host and native MIC",
        full_color = false,
        long = "(m)",
        short = "(m)",
      },
      ["mic:offload"] = {
        color = "blue",
        doc = "built for host, native MIC and offload to the MIC",
        full_color = false,
        long = "(m,o)",
        short = "(*)",
      },
      offload = {
        color = "blue",
        doc = "built for offload to the MIC only",
        full_color = false,
        long = "(o)",
        short = "(o)",
      },
    },
    validT = {
      gpu = 1,
      mic = 1,
      offload = 1,
    },
  },
  lmod = {
    displayT = {
      sticky = {
        color = "red",
        doc = "Module is Sticky, requires --force to unload or purge",
        long = "(S)",
        short = "(S)",
      },
    },
    validT = {
      sticky = 1,
    },
  },
  state = {
    displayT = {
      experimental = {
        color = "blue",
        doc = "Experimental",
        long = "(E)",
        short = "(E)",
      },
      obsolete = {
        color = "red",
        doc = "Obsolete",
        long = "(O)",
        short = "(O)",
      },
      testing = {
        color = "green",
        doc = "Testing",
        long = "(T)",
        short = "(T)",
      },
    },
    validT = {
      experimental = 1,
      obsolete = 1,
      testing = 1,
    },
  },
  status = {
    displayT = {
      active = {
        color = "yellow",
        doc = "Module is loaded",
        long = "(L)",
        short = "(L)",
      },
    },
    validT = {
      active = 1,
    },
  },
}
===========================
step 6
lua ProjectDIR/src/lmod.in.lua shell --regression_testing --miniConfig
===========================
Modules based on Lua: Version 8.7.53 2024-10-12 19:57 -05:00
    by Robert McLay mclay@tacc.utexas.edu
MODULEPATH:   ProjectDIR/rt/help/mf
LMOD_PACKAGE_PATH            D          nil          <empty>
LMOD_SYSTEM_DEFAULT_MODULES  D          __unknown__  <empty>
LMOD_USING_FAST_TCL_INTERP   Other      yes          no
===========================
step 7
lua ProjectDIR/src/lmod.in.lua shell --regression_testing --pod
===========================
=encoding UTF-8
module
=head1 SYNOPSIS
module [options] sub-command [args ...]
=head1 DESCRIPTION
This tool allow a user to control their environment by load and unloading modulefiles.  See https://lmod.readthedocs.org for more details.
=head1 OPTIONS
=over 4
=item I<-h -? -H --help>
This help message
=item I<-s availStyle --style=availStyle>
Site controlled avail style: system (default: system)
=item I<--regression_testing>
Lmod regression testing
=item I<-b --brief>
brief listing with only user specified modules
=item I<-D>
Program tracing written to stderr
=item I<--debug=dbglvl>
Program tracing written to stderr (where dbglvl is a number 1,2,3)
=item I<--pin_versions>
When doing a restore use specified version, do not follow defaults
=item I<-d --default>
List default modules only when used with avail
=item I<-q --quiet>
Do not print out warnings
=item I<--expert>
Expert mode
=item I<-t --terse>
Write out in machine readable format for commands: list, avail, spider, savelist
=item I<--initial_load>
loading Lmod for first time in a user shell
=item I<--latest>
Load latest (ignore default)
=item I<-I --ignore_cache>
Treat the cache file(s) as out-of-date
=item I<--novice>
Turn off expert and quiet flag
=item I<--raw>
Print modulefile in raw output when used with show
=item I<-w twidth --width=twidth>
Use this as max term width
=item I<-v --version>
Print version info and quit
=item I<-r --regexp>
use regular expression match
=item I<--gitversion>
Dump git version in a machine readable way and quit
=item I<--dumpversion>
Dump version in a machine readable way and quit
=item I<--dumpname>
Dump the name Lmod in a machine readable way and quit
=item I<--check_syntax --checkSyntax>
Checking module command syntax: do not load
=item I<--config>
Report Lmod Configuration
=item I<--miniConfig>
Report Lmod Configuration differences
=item I<--config_json>
Report Lmod Configuration in json format
=item I<--mt>
Report Module Table State
=item I<--timer>
report run times
=item I<-f --force>
force removal of a sticky module or save an empty collection
=item I<--redirect>
Send the output of list, avail, spider to stdout (not stderr)
=item I<--no_redirect>
Force output of list, avail and spider to stderr
=item I<--show_hidden -A --all>
Avail and spider will report hidden modules
=item I<--spider_timeout=timeout>
a timeout for spider
=item I<-T --trace>
trace major changes such as loads
=item I<--nx --no_extensions>
Do not print extensions
=item I<--loc --location>
Just print the file location when using show
=item I<--terse_show_extensions>
report extensions when doing a terse avail
=item I<--pod>
Generate pod format
=back
=head1 COMMAND OVERVIEW
module [options] sub-command [args ...]
Help sub-commands:
  help                              prints this message
  help                module [...]  print help message from module(s)
Loading/Unloading sub-commands:
  load | add          module [...]  load module(s)
  try-load | try-add  module [...]  Add module(s), do not complain if not found
  del | unload        module [...]  Remove module(s), do not complain if not found
  swap | sw | switch  m1 m2         unload m1 and load m2
  purge                             unload all modules
  refresh                           reload aliases from current list of modules.
  update                            reload all currently loaded modules.
Listing / Searching sub-commands:
  list                              List loaded modules
  list                s1 s2 ...     List loaded modules that match the pattern
  avail | av                        List available modules
  avail | av          string        List available modules that contain "string".
  category | cat                    List all categories
  category | cat      s1 s2 ...     List all categories that match the pattern and display their modules
  overview | ov                     List all available modules by short names with number of versions
  overview | ov       string        List available modules by short names with number of versions that contain "string"
  spider                            List all possible modules
  spider              module        List all possible version of that module file
  spider              string        List all module that contain the "string".
  spider              name/version  Detailed information about that version of the module.
  whatis              module        Print whatis information about module
  keyword | key       string        Search all name and whatis that contain "string".
Searching with Lmod:
  All searching (spider, list, avail, keyword) support regular expressions:
  -r spider           '^p'          Finds all the modules that start with `p' or `P'
  -r spider           mpi           Finds all modules that have "mpi" in their name.
  -r spider           'mpi$         Finds all modules that end with "mpi" in their name.
Handling a collection of modules:
  save | s                          Save the current list of modules to a user defined "default" collection.
  save | s            name          Save the current list of modules to "name" collection.
  reset                             The same as "restore system"
  restore | r                       Restore modules from the user's "default" or system default.
  restore | r         name          Restore modules from "name" collection.
  restore             system        Restore module state to system defaults.
  savelist                          List of saved collections.
  describe | mcc      name          Describe the contents of a module collection.
  disable             name          Disable (i.e. remove) a collection.
Deprecated commands:
  getdefault          [name]        load name collection of modules or user's "default" if no name given.
                                    ===> Use "restore" instead  <====
  setdefault          [name]        Save current list of modules to name if given, otherwise save as the default list for you the user.
                                    ===> Use "save" instead. <====
Miscellaneous sub-commands:
  is-loaded           modulefile    return a true status if module is loaded
  is-avail            modulefile    return a true status if module can be loaded
  show                modulefile    show the commands in the module file.
  use [-a]            path          Prepend or Append path to MODULEPATH.
  unuse               path          remove path from MODULEPATH.
  tablelist                         output list of active modules as a lua table.
Important Environment Variables:
  LMOD_COLORIZE                     If defined to be "YES" then Lmod prints properties and warning in color.
Lmod Web Sites
  Documentation:    https://lmod.readthedocs.org
  GitHub:           https://github.com/TACC/Lmod
  SourceForge:      https://lmod.sf.net
  TACC Homepage:    https://www.tacc.utexas.edu/research-development/tacc-projects/lmod
  To report a bug please read https://lmod.readthedocs.io/en/latest/075_bug_reporting.html
=head1 AUTHOR
Robert McLay mclay@tacc.utexas.edu
===========================
step 8
lua ProjectDIR/src/chkJson
===========================
Json is missing key: dot_files
rcfileA is a table
rcfileA has two entries
propT is a table
