Description: Edits to the Manual pages 
 A few minor edits to the distributed.net client manual pages.  The edits
 adjust the location of the client configuration to match debian systems, and
 make a few minor formatting changes to allow the man page to render properly.
Author: James E. Stark <jstark@ieee.org>
Last-Update: 2014-02-23
---
This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
--- a/amd64/dnetc.1
+++ b/amd64/dnetc.1
@@ -3,7 +3,7 @@
 .\" Copyright (c) 1996-2016
 .\"         distributed.net. All rights reserved.
 .\"
-.Id $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
+.\" $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
 .Dd Wed Feb  3 16:09:14 2016
 .Dt DNETC 1
 .Sh NAME
@@ -87,7 +87,7 @@
 .sp 1
 If you have never run the client before, it will initiate the menu-driven configuration. Save and quit when done, the configuration file will be saved \fBin the same directory as the client\fP. Now, simply restart the client. From that point on it will use the saved configuration.
 .sp 1
-The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '-config' option. A list of command line options is listed below.
+The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '\-config' option. A list of command line options is listed below.
 .Sh OPTIONS
 In addition to the conventional command line passed to the client from a shell, options may also be passed to the client using either or both of the following methods:
 .sp 0
@@ -95,7 +95,7 @@
 .sp 0
 	If set, this is parsed before the normal command line.
 .sp 0
-\-	using the \fB/usr/local/etc/dnetc.opt\fP and/or \fB/etc/dnetc.opt\fP
+\-	using the \fB//etc/distributed-net.conf\fP
 .sp 0
 	command files. If found, these are parsed after the normal
 .sp 0
@@ -260,7 +260,7 @@
 .El
 .Sh BUGS
 distributed.net maintains a database to assist with the tracking and resolution of bugs in dnetc and related software.
-.Sp
+.sp 0
 If you believe you have found a bug, please submit it to the distributed.net bug tracking database at http://bugs.distributed.net/
 .sp 1
 Please provide the entire version descriptor as displayed on client start when doing so. For example, the client version this manpage was generated for was "dnetc v2.9112-521-CFR-16020313 for Linux".
@@ -271,9 +271,7 @@
 Additional source of command line options (parsed first)
 .Sh FILES
 .Pp
-\fB/usr/local/etc/dnetc.opt\fP
-.sp 0
-\fB/etc/dnetc.opt\fP
+\fB/etc/distributed-net.conf\fP
 .sp 0
 Additional sources of command line options (parsed last)
 .Sh "SEE ALSO"
--- a/armel/dnetc.1
+++ b/armel/dnetc.1
@@ -3,7 +3,7 @@
 .\" Copyright (c) 1996-2014
 .\"         distributed.net. All rights reserved.
 .\"
-.Id $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
+.\" $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
 .Dd Mon Aug 11 18:57:54 2014
 .Dt DNETC 1
 .Sh NAME
@@ -84,7 +84,7 @@
 .sp 1
 If you have never run the client before, it will initiate the menu-driven configuration. Save and quit when done, the configuration file will be saved \fBin the same directory as the client\fP. Now, simply restart the client. From that point on it will use the saved configuration.
 .sp 1
-The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '-config' option. A list of command line options is listed below.
+The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '\-config' option. A list of command line options is listed below.
 .Sh OPTIONS
 In addition to the conventional command line passed to the client from a shell, options may also be passed to the client using either or both of the following methods:
 .sp 0
@@ -92,7 +92,7 @@
 .sp 0
 	If set, this is parsed before the normal command line.
 .sp 0
-\-	using the \fB/usr/local/etc/dnetc.opt\fP and/or \fB/etc/dnetc.opt\fP
+\-	using the \fB/etc/distributed-net.conf\fP
 .sp 0
 	command files. If found, these are parsed after the normal
 .sp 0
@@ -251,7 +251,7 @@
 .El
 .Sh BUGS
 distributed.net maintains a database to assist with the tracking and resolution of bugs in dnetc and related software.
-.Sp
+.sp 0
 If you believe you have found a bug, please submit it to the distributed.net bug tracking database at http://bugs.distributed.net/
 .sp 1
 Please provide the entire version descriptor as displayed on client start when doing so. For example, the client version this manpage was generated for was "dnetc v2.9111-520-CTR-14081118 for Linux".
@@ -262,9 +262,7 @@
 Additional source of command line options (parsed first)
 .Sh FILES
 .Pp
-\fB/usr/local/etc/dnetc.opt\fP
-.sp 0
-\fB/etc/dnetc.opt\fP
+\fB/etc/distributed-net.conf\fP
 .sp 0
 Additional sources of command line options (parsed last)
 .Sh "SEE ALSO"
--- a/i386/dnetc.1
+++ b/i386/dnetc.1
@@ -3,7 +3,7 @@
 .\" Copyright (c) 1996-2016
 .\"         distributed.net. All rights reserved.
 .\"
-.Id $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
+.\" $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
 .Dd Wed Feb  3 16:09:14 2016
 .Dt DNETC 1
 .Sh NAME
@@ -87,7 +87,7 @@
 .sp 1
 If you have never run the client before, it will initiate the menu-driven configuration. Save and quit when done, the configuration file will be saved \fBin the same directory as the client\fP. Now, simply restart the client. From that point on it will use the saved configuration.
 .sp 1
-The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '-config' option. A list of command line options is listed below.
+The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '\-config' option. A list of command line options is listed below.
 .Sh OPTIONS
 In addition to the conventional command line passed to the client from a shell, options may also be passed to the client using either or both of the following methods:
 .sp 0
@@ -95,7 +95,7 @@
 .sp 0
 	If set, this is parsed before the normal command line.
 .sp 0
-\-	using the \fB/usr/local/etc/dnetc.opt\fP and/or \fB/etc/dnetc.opt\fP
+\-	using the \fB//etc/distributed-net.conf\fP
 .sp 0
 	command files. If found, these are parsed after the normal
 .sp 0
@@ -260,7 +260,7 @@
 .El
 .Sh BUGS
 distributed.net maintains a database to assist with the tracking and resolution of bugs in dnetc and related software.
-.Sp
+.sp 0
 If you believe you have found a bug, please submit it to the distributed.net bug tracking database at http://bugs.distributed.net/
 .sp 1
 Please provide the entire version descriptor as displayed on client start when doing so. For example, the client version this manpage was generated for was "dnetc v2.9112-521-CFR-16020313 for Linux".
@@ -271,9 +271,7 @@
 Additional source of command line options (parsed first)
 .Sh FILES
 .Pp
-\fB/usr/local/etc/dnetc.opt\fP
-.sp 0
-\fB/etc/dnetc.opt\fP
+\fB/etc/distributed-net.conf\fP
 .sp 0
 Additional sources of command line options (parsed last)
 .Sh "SEE ALSO"
--- a/powerpc/dnetc.1
+++ b/powerpc/dnetc.1
@@ -3,7 +3,7 @@
 .\" Copyright (c) 1996-2016
 .\"         distributed.net. All rights reserved.
 .\"
-.Id $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
+.\" $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
 .Dd Sat Feb 13 17:09:10 2016
 .Dt DNETC 1
 .Sh NAME
@@ -87,7 +87,7 @@
 .sp 1
 If you have never run the client before, it will initiate the menu-driven configuration. Save and quit when done, the configuration file will be saved \fBin the same directory as the client\fP. Now, simply restart the client. From that point on it will use the saved configuration.
 .sp 1
-The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '-config' option. A list of command line options is listed below.
+The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '\-config' option. A list of command line options is listed below.
 .Sh OPTIONS
 In addition to the conventional command line passed to the client from a shell, options may also be passed to the client using either or both of the following methods:
 .sp 0
@@ -95,7 +95,7 @@
 .sp 0
 	If set, this is parsed before the normal command line.
 .sp 0
-\-	using the \fB/usr/local/etc/dnetc.opt\fP and/or \fB/etc/dnetc.opt\fP
+\-	using the \fB/etc/distributed-net.conf\fP
 .sp 0
 	command files. If found, these are parsed after the normal
 .sp 0
@@ -260,7 +260,7 @@
 .El
 .Sh BUGS
 distributed.net maintains a database to assist with the tracking and resolution of bugs in dnetc and related software.
-.Sp
+.sp 0
 If you believe you have found a bug, please submit it to the distributed.net bug tracking database at http://bugs.distributed.net/
 .sp 1
 Please provide the entire version descriptor as displayed on client start when doing so. For example, the client version this manpage was generated for was "dnetc v2.9112-521-CFR-16021317 for Linux".
@@ -271,9 +271,7 @@
 Additional source of command line options (parsed first)
 .Sh FILES
 .Pp
-\fB/usr/local/etc/dnetc.opt\fP
-.sp 0
-\fB/etc/dnetc.opt\fP
+\fB/etc/distributed-net.conf\fP
 .sp 0
 Additional sources of command line options (parsed last)
 .Sh "SEE ALSO"
--- a/mipsel/dnetc.1
+++ b/mipsel/dnetc.1
@@ -3,7 +3,7 @@
 .\" Copyright (c) 1996-2014
 .\"         distributed.net. All rights reserved.
 .\"
-.Id $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
+.\" $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
 .Dd Mon Aug 11 18:57:54 2014
 .Dt DNETC 1
 .Sh NAME
@@ -87,7 +87,7 @@
 .sp 1
 If you have never run the client before, it will initiate the menu-driven configuration. Save and quit when done, the configuration file will be saved \fBin the same directory as the client\fP. Now, simply restart the client. From that point on it will use the saved configuration.
 .sp 1
-The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '-config' option. A list of command line options is listed below.
+The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '\-config' option. A list of command line options is listed below.
 .Sh OPTIONS
 In addition to the conventional command line passed to the client from a shell, options may also be passed to the client using either or both of the following methods:
 .sp 0
@@ -95,7 +95,7 @@
 .sp 0
 	If set, this is parsed before the normal command line.
 .sp 0
-\-	using the \fB/usr/local/etc/dnetc.opt\fP and/or \fB/etc/dnetc.opt\fP
+\-	using the \fB//etc/distrubuted-net.conf\fP
 .sp 0
 	command files. If found, these are parsed after the normal
 .sp 0
@@ -260,7 +260,7 @@
 .El
 .Sh BUGS
 distributed.net maintains a database to assist with the tracking and resolution of bugs in dnetc and related software.
-.Sp
+.sp 0
 If you believe you have found a bug, please submit it to the distributed.net bug tracking database at http://bugs.distributed.net/
 .sp 1
 Please provide the entire version descriptor as displayed on client start when doing so. For example, the client version this manpage was generated for was "dnetc v2.9111-520-CTR-14081118 for Linux".
@@ -271,9 +271,7 @@
 Additional source of command line options (parsed first)
 .Sh FILES
 .Pp
-\fB/usr/local/etc/dnetc.opt\fP
-.sp 0
-\fB/etc/dnetc.opt\fP
+\fB/etc/distributed-net.conf\fP
 .sp 0
 Additional sources of command line options (parsed last)
 .Sh "SEE ALSO"
--- a/arm64/dnetc.1
+++ b/arm64/dnetc.1
@@ -3,7 +3,7 @@
 .\" Copyright (c) 1996-2016
 .\"         distributed.net. All rights reserved.
 .\"
-.Id $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
+.\" $Id: dnetc.1,v 1.84 2014/08/11 01:05:22 ertyu Exp $
 .Dd Sat Feb 13 19:09:10 2016
 .Dt DNETC 1
 .Sh NAME
@@ -87,7 +87,7 @@
 .sp 1
 If you have never run the client before, it will initiate the menu-driven configuration. Save and quit when done, the configuration file will be saved \fBin the same directory as the client\fP. Now, simply restart the client. From that point on it will use the saved configuration.
 .sp 1
-The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '-config' option. A list of command line options is listed below.
+The configuration options are fairly self-explanatory and can be run at any time by starting the client with the '\-config' option. A list of command line options is listed below.
 .Sh OPTIONS
 In addition to the conventional command line passed to the client from a shell, options may also be passed to the client using either or both of the following methods:
 .sp 0
@@ -95,7 +95,7 @@
 .sp 0
 	If set, this is parsed before the normal command line.
 .sp 0
-\-	using the \fB/usr/local/etc/dnetc.opt\fP and/or \fB/etc/dnetc.opt\fP
+\-	using the \fB/etc/distributed-net.conf\fP
 .sp 0
 	command files. If found, these are parsed after the normal
 .sp 0
@@ -260,7 +260,7 @@
 .El
 .Sh BUGS
 distributed.net maintains a database to assist with the tracking and resolution of bugs in dnetc and related software.
-.Sp
+.sp 0
 If you believe you have found a bug, please submit it to the distributed.net bug tracking database at http://bugs.distributed.net/
 .sp 1
 Please provide the entire version descriptor as displayed on client start when doing so. For example, the client version this manpage was generated for was "dnetc v2.9112-521-CTR-16021318 for Linux".
@@ -271,9 +271,7 @@
 Additional source of command line options (parsed first)
 .Sh FILES
 .Pp
-\fB/usr/local/etc/dnetc.opt\fP
-.sp 0
-\fB/etc/dnetc.opt\fP
+\fB/etc/distributed-net.conf\fP
 .sp 0
 Additional sources of command line options (parsed last)
 .Sh "SEE ALSO"
